Lumiquest Speedlight Modifiers
Bounce, shape and soften your lighting - however you want!
TO ORDER, use our order form. For enquiries, CALL US ON (02) 9929 7578 OR EMAIL US.
|
Lumiquest Softbox III (LQ-119)
The SoftBox III is roughly
twice the size of our original SoftBox, thereby producing considerably
softer shadows. It fits conventional flashes (Nikon, Canon,
Sunpak, Vivitar, etc.). Like the original SoftBox (LQ-107)
the SoftBox III is center weighted but it will block autofocus assist
and interfere with auto exposure UNLESS you
are using TTL. Application: This is the
largest SoftBox we offer. For use when shadow/softness is
more important than portability. $69 |
![]() |
|
Lumiquest Softbox (LQ-107) The Softbox enlarges and diffuses the light with the flash in the direct flash position. The light is softened and more evenly distributed as it passes through a center-weighted frosted diffuser. The unique design does not block either exposure sensors or auto focus assist beams on most flashes. Application: To achieve a very soft look with reduced shadow definition. For use on an individual flash or to softly illuminate the background in a multiple flash set up. Light Loss: Approximately 1 1/4 Stops. Dimension: Folds flat to 5" x 7"
|
![]() |
|
Lumiquest Quik Bounce (LQ-122) The LumiQuest
Quik Bounce is designed for use with or without a
ceiling to soften the light and transitioning from horizontal to
vertical format without having to adjust the Quik Bounce on the flash. |
![]() |
|
Lumiquest Pocket Bouncer (LQ-101) The Pocket
Bouncer enlarges and redirects light at a 90° angle from the
flash to soften the quality of light and distribute it over a wider
area. While no exposure compensation is necessary with automatic
flashes, operating distances are somewhat reduced.
Application:
To soften flash light quality with minimal light loss; to be used with
slaves or alone where low ceilings are not available, or where more
direct but soft fill light is desired. Light Loss:
Approximately 1 1/3 stops. Dimensions:
Folds flat to 4 1/2" x 7 1/4". |
![]() |
|
Lumiquest Soft Screen (LQ-051)
The LumiQuest Soft
Screen is a diffuser that is designed for the built-in
pop-up flash of many digital cameras. Application: Pop-Up Flash Diffuser.
Dimensions: Folds flat to approximately 4"x4" Note: Several
recent Digital SLR camera models have smaller “name plates” than their
predecessors. As a result, the LumiQuest Soft Screen might not be as
secure when attached to these cameras. If you find this is the case and
is problematic we have included 1" x 1/8" Velcro fasteners with each
Soft Screen to solve the problem. |
![]() ![]() Without Soft Screen ![]() With Soft Screen |